577 640 555
sws@sws.cz
 
 
Skladem
Ceník
Detail produktu

Vyřazeno

Produkt již není v naší nabídce.

S dotazem na dostupnost se obraťte na produktového manažera Ing. Vlastislav Juřík, VJurik@sws.cz.

IOI FWB-PCIE1x20 PCI Express x1 FW-B 3Port (2+1) + low profile

Výrobce: IOI

Kód: 324730

PartNumber: 61557

EAN: 4043619615575

Váha: 0.231 kg

Obvyklá dodací lhůta: 14 (dny)

Záruční lhůta: 24 (měsíce)

Záruční lhůta EU: 24 (měsíce)

Celní zařazení: 84718000 … více informací

84718000 0.00 Ostatní jednotky zařízení pro automatizované zpracování dat,ne:ČIT 21%
Přihlásit se

Vaše cena a stav skladu se zobrazí po přihlášení.

Obrázek produktu
Specifikace
- PCI Express Host Adapter na 3 porty OHCI 1.1 kompatibilní IEEE-1394B
- PCI Express x1
- 2+1 FireWire-B porty (2 x externí, 1 x interní)
- čipová sada: Agere/LSI FW643
- rychlost přenosu dat: 800Mbps
- Bus power konektor: IDE 4-pin DC napájecí konektor
- pro Windows 2000/XP, Server2003, MacOS 10.4.8 nebo vyšší, Linux 2.6
- Standard- a LowProfile záslepka slotu součástí dodávky

OHCI (Open Host Controller Interface)
Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
8 Kbyte isochronous transmit FIFO.
4 Kbyte asynchronous transmit FIFO.
8 Kbyte isochronous receive FIFO.
8 Kbyte asynchronous receive FIFO.
Dedicated asynchronous and isochronous descriptor-based DMA engines.
Eight isochronous transmit contexts.
Eight isochronous receive contexts.
Supports parallel processing of incoming physical read and write requests.
Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.  


1394b-2002 Link
Cycle master and isochronous resource manager capable.
Supports 1394a-2000 and 1394b-2002 acceleration features.  

1394b-2002 PHY
Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
Link is not required for hub operation.
Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
Does not require external filter capacitor for PLL.
Supports arbitrated short bus reset to improve utiliza-tion of the bus.
Supports ack-accelerated arbitration and fly-by concat-enation.
Supports PHY pinging and remote PHY access pack-ets.
Fully supports suspend/resume.
Reports cable power fail interrupt when voltage at CPS ball falls below 7.5 V.

Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.

Ke stažení, odkazy
Katalog DeLock (6757 KB)

Neručíme za správnost informací, poskytovaných třetí stranou.